HP ScanJet 3200C Flatbed Scanner "hardware" Questions

Software is installed. If finds new hardware. Software is installed. If finds new hardware. When you go to scan it either tells you that it cannot communicate with the device or the scanner just ...

...via desk top icon, nothing happens. try this... click start right click my computer properties hardware device manager ?ports scan for hardware ...

...check the usb cable is connected properly. , right click on my computer and go to properties then hardware in that click on device manger and check there is any other device is listed if it is

...removed and reinstalled the program and still get the same message. It's a problem with the scanner hardware. Make sure the lock on the scanner isn't set. Some models come with a locking switch under ...

...your scanner to computer after installing driver it need restart system. Then if it found your hardware as new hardware locate your driver location. Let me know if you need further assistance. ...

...plug in to usb port Did you install the software/driver? Did windows recognize your scanner in your hardware profile? Don't use the software from HP, It sucks. If the HP software is not working ...

...fee more than the cost of a new one. I have over 10 of these scanners and they too frequently have hardware failures right out of the box. The good news is if you get a working unit they are

...likely your scanner was put offline by a microsoft update. Mine was knocked out of business by a hardware driver update downloaded from microsoft update. Try to roll back the scanner driver (my ...

...It's due to a port protection in microsoft systems after windows NT, old drivers can't use some hardware connected to some ports (ex: pararell port). You need to set up your system so drivers can ...

...is accessed, the error."Sorry, could not access your scanner WHat operating system are you using? Hardware? Try this solution... Does it show up in your hardware profiles? What does it say on ...