scratch like a thread,u better clean the glass from both side n see,if u want any help like how to do that pls let me know when u r helping me then help me totaly. Tell me how to remove glass to clean
Question about HP ScanJet Office Equipment & Supplies
glass with IsoPropyl alcohol. Try scanning a few images to find if the scratch marks are on the same place on all images. Once confirmed that the glass is scratched, you can change the glass. You need
Question about HP ScanJet Office Equipment & Supplies
...alcohol. Dont use solvents. Check if there is any scratch on the glass. Repeated scanning with stapler pins can scratch the glass. If it is scratched, you may need to chage it. S. Mohan, ...
Question about HP ScanJet Office Equipment & Supplies
...to fix this? Clean the glass thoroughly with a damp cloth. Dont use solvents. Check if the glass is scratched, if scratched you may need to replace it. S. ...
...scratch in the glass (due to stapler pins) or dirt stuck firmly. Try cleaning with Isopropyl alcohol. For absolute emergency, you can wet a cotton bud in after shave and clean the right spot, take ...
scratch line on the glass due the stapler bullet. how to avoid line on the image... tq You need to change the glass! It is not easily available in the market. Ensure that the electronics, particularly
Question about HP ScanJet Office Equipment & Supplies
...glass and mine has a tiny scratch in the lens that is causing the line. This could be your problem. find the lens and use a LED flashlight to inspect your lens for scratches. If its scratched like ...
scratch on glass line on scan replace glass or try to remove the scratch if its showing up on every scan
Question about HP ScanJet Office Equipment & Supplies
...glass will hold onto dirt tenaciously. Use a cotton swab & alcohol in line with the scratch to coax it out. Don't try to scrape it with a tool, that just makes the scratch deeper. If you still don't ...
Question about HP ScanJet Office Equipment & Supplies
...scratch on your glass, or your scanner is going bad. 1. Clean the glass, then scan again. If you still have that line, Wipe the hell out of the glass and blow air through the calibration holes. If ...
293 questions posted
Usually answered in minutes!
109 Questions
80 Questions
73 Questions
80 Questions
68 Questions