red light f2 Is the rotor jammed? Free jammed rotor, check for damage to rotor and rotor housing. Is the stator wiring from controller OK? Check stator windings for correct resistance Is the rotor ...
Fisher & Paykel Model DD603 Top drawer makes grinding noise while running. Most likely the rotor is either damaged or there is some debris sitting in the rotor cavity. Follow the instructions in ...
Question about Fisher and Paykel Dishwashers
My dishwasher is displaying an F2 error code, how do I clear it? Double drawer, top not functionig This means the rotor at the base of the drawer is causing some fault. Check the cavity after taking ...
my dishwasher flashes F2, what do i do This means the rotor of the wash/ drain motor is faulty. Take the rotor out and check. Refer to user manual for checking rotor cavity. It is possible the rotor ...
F2 ERROR CODE HI- Probably the Motor Rotor is bad or there is some glass in the rotor. Remove the large screen in the bottom of the drawer (turn lock-nut counter clockwise) and remove the motor rotor
Question about Fisher and Paykel Dishwashers
We have the error F2 showing on our dish drawers normally the F2 showing on both drawers is unusual. It is a rotor fault. Which means either the rotor that drives the wash arm and also works as a pump
what is fault code f2 on fisher & paykel dishwasher Rotor is not moving. Remove the spray arm, filters and the rotor, check for debris. Rotor impeller should turn if you try to turn it manually. ...
little grinding noise. probably motor rotor? easy to replace yourself? I am assuming you are experiencing this problem in one of the drawers of the dishwasher. It might be simply some hard waste ...
Bottom drawer showing F2 & tool. This means the rotor driving the impeller and wash arm is faulty or the rotor cavity has some obstructions. You will have to remove the rotor and clean the cavity ...
Fisher Paykel DS603 rotor froze in motor I replaced the rotor a week ago and now the motor is froze and the rotor will not come out I pulled the rotor apart and tried to turn the rotor shaft with no ...
149 questions posted
Usually answered in minutes!
82 Questions
31 Questions
53 Questions
27 Questions
25 Questions