...replacing the top of the machine firmly. By then turning the machine upside down, the coins will drop out and can be retrieved. Finish the job by returning the machine to the upright
Question about Speed Queen Washing Machines
...come off (usually with a key), which will give you access to the coin mechanism and timer. There you usually need a 5/16 wrench or a flat screwdriver to remove the screw at the top of the
Question about Whirlpool Washing Machines
...remove the coins in a top load Whirlpool Cabrio? Not easily unless they are just under the agitator. A full tear down, remove the case, remove the agitator, lift the drum. If you are lucky, you will ...
Question about Maytag Washing Machines
...coins load vertically not flat). How do you remove the coin mechanism to unjam it or make the coin come back out the way it came in as its obviously quite a damaged coin? thank in advance, Rachael ...
...Remove the access plate above the coin acceptor with a key. The display should show code 6 and two numbers. Code 6 is the regular cycle and the number of coins required to start. ...
...oasis top loader - model 110.27092603 Can you also give instructions for removing the top and how to remove the coins before they get into the pump. It needs disassembled and requires special
Question about Kenmore Washing Machines
coin under the kenmore elite oasis agitator, how do i remove it I think there is a coin under the agitator, how do I remove the agitator to find out. Need help remove cap at top of cone unscrew
...cycle. Instead it just eats the coins and robs you of washing your clothes. Any suggestions? remove slide cover .. move the slide lever back untill it is on #1 or the lowest setting... hope it ...
thanks, Dee use side of spanner to open the circular water drain plug on coin trap, remove all water. use flat screwdriver to lift yellow tab at top of coin trap whiloe turning coin trap anticlockwise
...screw off. There is a coin in one of them. remove the top panel and each fin has 2 5/16 screws holding them to the drum. turn the drum so the fin is on top and remove the screws then remove the ...
2 questions posted
Usually answered in minutes!
123 Questions
44 Questions
40 Questions
24 Questions