...drive belt.It will be in clear view,detach the old drive belt.Use the screwdriver to unscrew the pump coupling.Then gently slide the old belt off of the drive belt notch.If the belt is broken,be ...
...belt drive models. Direct drive models do not have a back access panel and the water inlet valve is located on the left side viewed from the rear while belt drive models do have back access panel and ...
drive belt. The motor is installed on a plate and held by a spring. To install the belts easier, push motor towards the transmission pulley when installing new belts. Part numbers: 211124 for the pump
...drive belt is either broken or has slipped off. The drive pulley and the pump are driven by a single belt. Replace the drive belt if broken or loose and has slipped off. Disconnect power then drain ...
Question about Kenmore Washing Machines
...drive belt (?) for my Kenmore top-loading washing machine, Model 110.4563291. It is a very old machine but works great. I cannot find part numbers for the machine as most part shops do not recognize ...
...loosen the belt tension bolt. Then place the belt over the drive wheels.Now tighten the belt tensioning bolt, while applying force to the belt to tighten it around the drive wheels.take ...
...drive belt on a Whirlpool Duet washer, follow these steps: 1. Unplug the washer and remove the rear panel. 2. Place the drive belt on the drive motor pulley with the ribbed side on the drive motor ...
Question about Frigidaire Washing Machines
...turn dial won't spin fills and drains water if i manually turn dial Direct drive or belt drive? If belt drive then thats easy, motor belt or pulley. Direct drive? motor, ,,,
drive belt was thrown. Reinstalled it (perhaps badly) and machine worked for another week or maybe 10 loads. I now have a new drive belt and have replaced the motor isolators, but I can't get the belt
85 questions posted
Usually answered in minutes!
51 Questions
36 Questions
2 Questions
