side (inside the latch assy) releasing the catch, and the door can be opened. Sometimes, the bi-metallic part bends OK, but the latch catches and won39;t release. It just needs a little vibration to
Question about Washing Machines
...won't open. The door latch may have broken. You can sometimes open the door from the inside. You will know the door latch is broken if the door handle is floppy. If the door handle is not ...
won39;t reset by pressing pause/start/power or unplugging washer. Remove the bottom panel which would give you access to the pump area if you look up along the side that the door lock is on you will
won39;t open Slide a paint scraper or similar between the machine and the latch side and push it quite hard and it should open. Mine does and I found the fix on this site! Hi, Has all the water gone
...won39;t open. I plugged out the machine after the wash and when i plugged it in again, the door wont open. Can you help me? Hi. The door does not open because there is water inside the machine. To ...
Question about Electrolux Washing Machines
...won39;t open cannot find latch release or any other way of getting the door open. Try unpluging for a few minutes . wake the washer up by turning knob then at the same time press and hold start ...
...won39;t open up. Please help! The LG Tromm model is WD14331AD. Many thanks! I am unable to find that model number for your unit but I did find another that was close and is also an LG Tromm click ...
...side of the tub near the top,it39;s a little tricky to get at it,the screws that hold it on are 1/4 inch,you can use a nut driver just stick some plumbers putty or permagum in the socket so the ...
...won39;t unlock Originally it looked done but the door lock light was still on. I unplugged and replugged in and now it says Add a Garment and the Door Lock is still on. Makes a click like it is ...
1 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
680 Questions
658 Questions