Maytag MVWX500XL High-Efficiency Bravos X Top Load Washer - Lunar Silv "switch lid open close" Questions

Ad

Question about Whirlpool Washing Machines

1 Answer

...lid switch,you could have broke it when you closed the lid.also next time you write send the model number,open the lid,get a screw driver and stick it in the hole on top,that's the lid switch set ...

Ad

...lid switch failure. Heres what the service manual for your washer says about the failure. Flashes if the lid is NOT opened after the cycle was completed. The electronic control board must detect that ...

Ad

...LID SWITCH, HOW DO i DO THAT? THERS NO REAL PROBLEM, i JUST WANT TO WATCH THE AGITATOR TO MAKE SURE THAT IT IS OPERATING, i HAVE THE FEELING THAT IT IS NOT, BECAUSE WHEN i LIFT UP THE LID i DONT SEE ...

Question about Kenmore Washing Machines

2 Answers

lid switch,or open the lid and stick a screw driver in the hole where the piece on the lid goes down into when the lid is closed, if it doesn't click and the machine doesn't run then the lid switch is

Question about GE Washing Machines

1 Answer

...- Lid door open error Lid /door isnt fully closing or is open during wash cycle. Close lid. · Check wiring harness · Check lid switch · Check unbalance switch · Check circuit ...

Question about Washing Machines

2 Answers

...lid switch Yes. You need to determine if the switch is normally open contact or closed contact after which you bypass it. The hard bit is probably finding a spot where you can get at the wires to ...

Question about Ariston Technologies Washing Machines

1 Answer

...spinning problems on machines are cause by this lid safety switch. Washing machines cannot spin if the lid is not closed and this safety switch is not working to switch power to the spinning

Question about Washing Machines

1 Answer

lid is open. The switch could be dirty or broken or loose. There is a little leg sticking out from the underside of the lid, that goes into a slot on the machine when the lid is closed, that activates

Question about Kenmore Washing Machines

1 Answer

...lid switch. If the lid switch is not making proper contact, or is broken, the washer will fill, agitate (some model washers won't), then just stop when it gets to the spin cycle. If this is what you ...

lid close switch and pressing on the switch with a Q-tip. If other functions stop when the lid is opened and work when the lid is closed then you have another problem. The problem could be in the wash

Not finding what you are looking for?
Maytag MVWX500XL High-Efficiency Bravos X Top Load Washer - Lunar Silv Logo

11 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...