Sony UP DR100 Thermal Photo Printer "paper end" Questions

...Paper End Blinks.:: Buzzer Repeats a short 3-time sound twice at intervals of 0.5 second.:: Set a new paper roll. Paper Near End Blinks.(Once a second) :: buzzer Repeats a short 3-time sound twice at ...

...guides have the paper held in properly.. if you pull the tray out and press the paper down the guides should be touching the sides and end of the paper this will allow the paper to be fed

...to the paper end sensor. Probably the paper end sensor has its plastic legs broken. If so, replace the paper end sensor and you will solve the error message. Good luck and please rate me,

...end to stop the paper shooting off the end) has broken & I would like to replace it. It's a small part but I cannot seem to find one anywhere :( Can anyone tell me where I can get a ...

paper on the other end be released one by one. another thing is that you may be inserting the paper too much inside the paper tray. try inserting the paper slowly and stop at the first slightest notch

...paper. When that happened to me, i noticed that there was a pencil stuck in mine. I ended taking it all apart in the end, but that is only because someone forced it in there. In the end, it worked! ...

...paper end sensor for epson lq 2180 how to check paper end sensor for epson lq 2180 have to remove all the covers and its located in the paper load tray at the back has a plastci trigger lever and ...

...end The easiest way to clean the paper path if you think you have a jam but cannot see anything is to "floss" the paper path with a heavier piece of paper. Take a narrow piece of heavy paper (inch ...

...end which doesn't work with less than 11 inch paper. Is there a way t I have a Samsung SCX-4521F with a Mac and just upgraded the OS to Snow Leopard. Now in landscape mode the prints are end for ...

paper jam at inner end of paper tray Remove the cartrige and place the tray at the end of the printer then use small pillar to remove the paper