Sony VAIO Digital Studio PCV-RS410 PC Desktop "bios access" Questions

...BIOS the settings are the same. And I cannot access the disk to boot from it and install VectorLinux. you should be able to exit and save changes, which my guess is you are exiting without saving the ...

...access the BIOS setup utility and reconfigure your hardware settings.You might need to clear the CMOS for several reasons but usually you'll want to clear the CMOS to help troubleshoot or ...

What can't I boot to bios with F2? Try pressing F3 when the Sony Logo appears, and then F2 whan the option appears on the screen: http://www.manualslib.com/manual/161915/Sony-Pcv-Rxp-Rzp.html?page=30 ...

...click "F2" to access the bios, go to to exit, choose "Default Maximum setting", save upon exit....restart. Hope that helps you out, msg. me is there are still problems. Thanks for asking

bios cannot access. Secondly, if the bios is reading the disc then ensure that the disc is set as part of the boot sequence-preferably the item after DVD drive should be Hard Disc in the boot menu. If

...access my old one ("guest" works well). I can't even update the date and time-- and the PW I wrote down does not work. Ideas? remove the bios battery from the mainboard for about 45 seconds. if this ...

How do access the BIOS on this machine? Upon booting up the machine continually press the F12 and F4 buttons.

access bios by pressing F2 repeatedly right after you turn on the computer. Then on bottom of screen it will say you could press F5 or another button to load default values. Do that then save and exit

...BIOS. This computer didn't come with recovery disks, and I was too dumb to think I'd ever need them, because I knew they were loaded onto the partition. Now I can't access the ...

access to recovery utilities by hitting the F10 key during boot. From what I read that section of the bios also allows you to do data backup and recovery (may require the Sony Recovery Discs). Just in