Printer Tray I would like to select tray 2 as my default printer tray. How do I do this? Go into the Printer Dialog box from the start button. Right click on the printer and select Properties. Select ...
Question about Sharp AL Office Equipment & Supplies
sharp al-1250 wont switch from tray 1 leter to tray 2 legal when printing how can i make this work On the control panel there should be a button that either says paper select or looks like a bucket ...
Question about Sharp AL Office Equipment & Supplies
...,it still shows flaing "P" Could be dirty feed rollers. I am assuming you are selecting the lower tray as your paper source when you get the "P" OK, so take out the paper tray. Remove all the paper ...
Question about Sharp AL Office Equipment & Supplies
there is a new stack of paper in the tray, but when I try to make a copy I get a p errpr message. There is a paper jammed in the copier. Remove it and try again. If this doesn't work try feeding paper
Question about Sharp AL Office Equipment & Supplies
"P" is blinking. There is no paper jam. Paper is not feeding from the paper tray. Sharp AL 1452 is blinking "P". There is no apparent paper jam. The paper will not feed into the machine from the paper
...i run 10 copies, there will be at least 1 jam and 1 case of pulling two sheet at once from the tray. never in the same order. always random within ten copies. any help would be appreciated! When ...
Question about Sharp AL Office Equipment & Supplies
...displays L1 and nothing works There is a crystal lock under the scanner and on the top of the exit tray. just rotate the lock, makes sure that the front of the lock is on the direction of the
also remove paper from the cassette(which pulls out from the front) and try feeding paper from the tray on the right side. Good luck
...IS FINE. THANKS FOR YOUR HELP There is a knob on the left side underneath, above the output tray, that locks/unlocks the scanning mechanism. Sometimes it slips into the lock position by
Question about Sharp AL Office Equipment & Supplies
AL- 1540 CS PAPER WILL NOT FEED CORRECTLY WHEN USING THE FEEDING TRAY OR MANUAL FEED THE COPY GETS JAMMED AROUND THE DRUM AND I HAVE TO OPEN THE DOOR OF THE MACHINE AND PULL OUT. THE PAPER COMES OUT ...
11 questions posted
Usually answered in minutes!
91 Questions
55 Questions
33 Questions
27 Questions
26 Questions