...error code H 4 which alternates on the screen. The unit will not copy, print or scan now. Thank you. This is a critical issue which needs constant monitoring of the device and continuous chat / email ...
...error". Hope you find a solution, and not an expensive one. I fixed this problem (after exhausting the usual) by removing the actual scan locking plug. It is a design fault. I do not think there is ...
Question about Sharp AL Office Equipment & Supplies
copier apart a few times. I must have3 not tighened the screws enough. it only took two days to figure this out. must not have been tight enough and head could not seat right. There is a small plastic
Error Code Printer is Flashing "L" then "1" then "L" again and "1". Toner is full, paper tray ready. This is not one of the codes posted on the printer for service to toner, paper, or drum. We can not
...copier should come to ready. Lay a piece of paper on the glass and press the print button to watch the scanner movement. If it binds up or does not scan correctly there are 2 possibilities. 1) your ...
...all TRY: Error 259 when attempting to scan from MP Navigator EX ERROR: Cannot scan for these reasons:...Code : 2,178,0 ERROR: Printing... Scan after it is complete (Code : 2, 113,0) ERROR: Scan ...
Question about Sharp AL Office Equipment & Supplies
...error code 2,140,2 when i scan douument i m trying to scan document but it is showing error code 2,140,2 on PC and error code E6 at printer please help me.... I m trying to scan my document but it is ...
not scanning...error code 720f Software trouble error code 720f Error: Unknown error Causes: Unable to determine the cause. Check procedures/corrective measures: Turn the main power switch off and on.
copier's been told to scan to. Open up the web page and look at your scan destinations. Something's changed either there or in the network. pls my is ifeanyi i need help i have sharp arm450 is showing
...Code : 2,178,0 ERROR: Printing... Scan after it is complete (Code : 2, 113,0) ERROR: Scan Failed Nothing happens after Start button (for Color or Black) is pressed (after Scan is pushed or selected
119 questions posted
Usually answered in minutes!
55 Questions
33 Questions
27 Questions
26 Questions
23 Questions