...level on top of the washer near the front edge. Look for the air bubble in the level to determine which side of the washer is out of balance. The side that the bubble leans toward is the side the ...
Question about Roper Washing Machines
...Top on ''Extra Large'' I have a Roper Washer.. it works fine on all temps... but the water does only fills up to about 75-80% on ''Extra Large'' Capacity Load...? any ideas?? seems to me it should ...
Question about Admiral Washing Machines
top of the tub. Any solutions? Purchased washer 11/02. Remove the control console cover. Find the water level switch. It has a small tube attached to it. Remove the tube and blow air through it. It is
...be reached (inches)? At the "small load" setting there is 4" of water in an empty tub. At the "large load" setting, there is 7.5" in the tub. Water level switch? Timer problem? water level ...
Question about Samsung Washing Machines
...level on the top surface and make sure the machine is sitting level. Next screw down the feet as necessary to maintain a level washer. In some cases, the "solenoid" is out which is servicable by a ...
...level on the top of the four sides (front side, left side, right side and backside) then make necessary adjustment if needed on the 4 leg of the washer. Also check the water level of the balancer and ...
...level on top of the washer; make sure it is in the center. Take a look at the level and see where the bubble is in the water level? Accordingly you have to lower or raise either 4 corners of the ...
Question about Whirlpool Washing Machines
...top-loading washer. The volume level know is very hard to turn to different levels, and the water level does not seem correct to fill the tub. if it has been quite some time since you turned the knob ...
...level switch in a Kenmore top load ... ? 1:29 https://www.youtube.com/watch?v=eD-FYADHCEU Apr 25, 2011 - Uploaded by theapplianceman This video will show you how the water level switch should be ...
...level in top load washer we have a ge top load washer and the water level is too low to cover even a regular load Load selector switch has a hose attached to it that goes to bottom of washer tub. It ...
11 questions posted
Usually answered in minutes!
691 Questions
231 Questions
191 Questions
118 Questions
116 Questions