Roper RAX7244KQ Top Load Washer "lid stay" Questions

...lid lock stay on with constant beeping every second then when i push the start button the 2 green lights go out and the red lid lock light stays on but no beeps.The machine is only 1 month old i have ...

lid will not stay up Lid will not stay up like it did before Sounds lid the hinge or springs may be broken need more help contact me

water sensor Does the lid lock light start flashing and stay locked? Lid lock could be bad. If lock light isn’t flashing, it could be normal. Some models aren’t designed to lock until after tub fills

...stay on the switch that activates when out of balance is the same switch as the lid switch and it is activated by a small lever if the out of balance was really bad ,that lever can get on the wrong ...

...STAY'S BLINKING REPLACED THE ACTUATOR WORKED FINE FOR AWHILE THEN STARTED DOING THIS START TO FILL SENSING LIGHT COMES STAYS ON CLICKS OFF LID LIGHT COMES ON BLINKS RED MAKES NO NOISES AT ALL Thank ...

...lid and stay standby with out working ? power off by unplug and wait few minutes and again tried but the result is same The unit will not operate in this condition until the lid lock signals a locked ...

...replace that lid switch do not leave it jumped out. Someone could get hurt monkeying around with a washer that is not properly fited to be safe. Stay safe my friend. How it works: Direct Drive ...

...lid won't stay up. Everything else is working properly, and the lid still locks to run laundry, just won't stay up between loads! Can someone please explain how to fix this? Hello Chrissym1313, Taken ...