Roper RAS8445KQ Top Load Washer "jumper broke" Questions

...broke off....where can i order part and how to replace.... if you stick lock back into hole, you can wash but you have to jimmie it in order to open lid once load is finished. Can you bypass the lid ...

...broke. To get to the connection to test for continuity on th eswitch, remove the two screws that hold the control panel to the cabinet and raise the panel. The lid switch connection is located in the ...

...broke away so now even when the lid of the washing machine is closed, the machine won't start because ti can't detect the lid as closed. What can I do? You can bypass the switch by jambing something ...

...broke off on the lid or If he is mechanically inclined have him open the top find the lid switch connection and use a jumper wire from positon 1 to positon 3 on the lid switch wire connection this ...

...broke off. I just replaced coupler., hooked all back together and it now works...BUT I have a smell that smells electrical and as machine will not work will case off, its hard to trace where smell is ...

...broke free but now it started this leak. Those top loaders are pretty dang simple and easy to repair. To access the pump motor and that pesky drive coupling you must remove the cabinet and expose the ...

...jumper wire and get a new lid switch,when you have it pop the two mtal clips and then you can pull the frame off of the washer to get at the switch.if you send me the model number i can look up your ...

...broke off washing mach. model # 10122722101 First, see the Sears parts site for your washer: ...

...broke or what???? his assumes that you have a basic Kenmore / Whirlpool top load, direct drive, neutral drain (it doesn't spin until the pump removes most of the water) machine. First, see the Sears ...

...broke normally they crack in the middle... not sure what your problem exactly is as you did not post it here but if it is not spinning check the lid switch ... you can take the 2 screws out of the ...