Kenmore 2942 400 3.2 cu. ft. Top Load Washing Machine "level load washing" Questions

...load washing machine my washing machine is not level when it spins it knocks up against the side how do i fix it in each of the four corners are adjustment feet. they're white nylon bolts. use a ...

level pending on the load - High for a full load etc & see how the washing comes out, a lot of times the auto level control will not have as much water in the drum as one would like, so to speak..

it will shift, is if you have uneven loads. Be certain not to over load the drum, allow the water level to rise too high, or spin wildly out of control. Additionally, the floor should be level as well

...level of our HE front load washing machine. Kenmore (Frigidaire) Model Number 970-C47192-10 I have used extra weight inside the tub. I have used bottle of water and also a plastic 2 or 5 pound

...level from side to side and also front to back. The machine has leveling feet to adjust. Make sure they are all in firm contact with the floor when leveled. 2. Wash items that are alike in material. ...

...load size and type. This level is all that is needed. The reason the clothes are hardly wet at the end of the cycle is due to the high spin speed (compared to almost all top loading machines). If you ...

...load size and adjust water level for best cleaning and rinsing performance. You will generally find these options in higher-priced top-loading washers. A benefit of front-loading washing machines is ...

...instructions. How do you set the machine so you can wash a small load (and not have to fill the whole cylinder with water?) Thanks this one only has 1 setting on water level. same size uses same ...

level from side to side and from front to back using the adjusting feet on bottom of washer. also could be that the load of wash is not balanced in the tub. This happens more on a top load washer than

...happened with washing in it then just put your hand in and readjust the washing and start again. Also make sure the washing machine is level under empty load. Adjust the levelling screws if