Roper RAS6233KQ Top Load Washer "agitator removal old washers" Questions

...agitator. I have an old Kenmore 80 series washer with a sheet stuck under the agitator. How do I get it out? Why is it in under there? remove agitator top remove 7/16 bolt to remove agitator. tub ...

agitator off, I was able to clean all of the old built up detergent and fabric softner with some old fashion scrubbing. Then I used some CLR to get what ever I missed. I pushed the agitator back until

...agitator would spin not the tub, then I found pieces of what looks like old metal inside the tub, but the tub is intact? Should I even try to fix this or get a new washer, its appx.7-8yrs old? Repair ...

...old type stains, especially on white clothes where it is easier to see. where do i look for a leak or faulty seal? or where else could it be coming from Remove agitator cap. Remove bolt underneath. ...

...is causing a problem when it is spinning. How do I remove the agitator to see what is underneath? on the old type you turn the centre top to unscrew it. pull up the agitator and replace the same ...

the bottom. Take the top and turn it upside down to remove the platic interior part that holds these 4 dogs. REMOVE the old dos and replace with new and do a reverse engineeriong putting agitator back

agitator I HAVE OLD KENMORE STACKABLE WASHER/DRYER AND NEED TO REPLACE AGITATOR. MODEL 41799375100 CANNOT FIND MANUALS Remove the agitator cap and the bolt in the middle that holds the agitator. Reach

...old then the agitator just pulls out, remove cap, if no bolt, just grab hold and lift up hard...picture. You can also clean the drain hose as that might be clogged if the agitator is fine. Hope this ...

agitator my 2 yr old love to throw things in the washer..now my tie for my rob has been wound around the agitator and under it...can i take the agitator off to "unwind" it or do i need to call someone

...****** it apart and remove the old worn out ...