Question about Rheem Water Heaters
...SET TO SEA LEVEL. ORFICES NEED TO BE CHANGED Question moved from Kitchen Ranges. You need a High Altitude Conversion Kit from the maker. Then you need a gas registered technician to fit them and ...
hot water heater flame problem water heater lights okay. at sea level flame does not enter flame tube but comes back past igniter etc. at higher altitudes the flame enters the flame tube and exits out
Question about Rheem Water Heaters
...hiding our for winter(nests) squirrels? i contacted rheem,they sent me a new board and a high altitude programming chip,i barely live above sea level,it fixed the problem.rheem said the board ...
Question about Rinnai Water Heaters
Different gas control valve needed. In some cases there are dip switch changes for type of gas and altitude above sea level ... the higher the elevation, the hotter gas burns. Here is expected result
water heater flame problem #G6A-7E heater lights just fine and stays lit the problem is at higher altitudes the flame enters the flame tube but exits the end as if to much pressure extends 3 or 4 ...
...failed gas solenoid valve.82 is gas-type-data-failure = program PCB for proper gas type, or proper altitude above sea level.If this is new installation, Rheem-paloma might tell you to contact the ...
I have a Rheem paloma Tankless WH Model PTG-53PVN. I am getting error 05 and then error 13 and it shuts down. I have run through all the cleaning etc. - no help. Lat year I received a replacement ...
...some tankless models work with either type gas depending on dip switch setting. Dip switches and altitude Ask Rheem if the dip switch setting on your model matches altitude above sea level. ...
4 questions posted
Usually answered in minutes!