Kenmore 6.7 cu. ft. Electric Dryer "replaced elements hot water" Questions

Ad

Question about Whirlpool Washing Machines

2 Answers

hot water heater is not heating up the water. I have checked the breaker and don't have a clue as to what to do next. I also pushed the red reset button. (1)Have the unit check for electric voltage to

Ad

...Hot Water Heater, On? Not tripped? You will need a Multimeter to verify voltage to the thermostat and heating elements, If you feel comfortable working with electricity and basic hand tools it's a ...

Ad

Question about Washing Machines

1 Answer

...elements, they use hot water from the hot water tank, most likely clogged screen at either end of the hot water hose, replace or clean screen(s) check for screen at water valve, bad,weak or burned ...

Question about Asko Washing Machines

4 Answers

hot water check the heating element and the sensor. The menues for the cycles allow you to choose temperatures; you can check that they are not set low.The warranty is 3 years and then years 4 & 5

Question about Washing Machines

1 Answer

...hot water fill just like the warm water fill. I replaced water thermostat and that didn't help. Hoes are connected properly. Valve electrical hookup could be reversed however no way to tell? Will the ...

...or there is no power from the panel to switch on the heater for the hot wash. Check the resistance of the coil and if open this must be replaced,check this link; Heater

Question about Hotpoint Washing Machines

2 Answers

hot water supply hose feel hot? If new, the two water supply hoses are reversed. If in place, and worked before, then possibly: 1. Hot water heater not hot enough. 2. In-wall heater can't keep up with

Question about Washing Machines

1 Answer

...hot water inlet valve is malfunctioning. You can test this by feeling if the hot water inlet pipe gets hot when the washer is supposed to be filling with hot water. If you washer is cold fill only it ...

Question about Kenmore HE2 Washing Machines

1 Answer

my he2 dryer is not heating, what should I check first? If it's electric, you have a bad heating element, probably need to be replace, it's the same as a hot water heater

Question about Washing Machines

1 Answer

...hot water. Already replaced water heating element and checked pressure switch at top of machine just under lid with the thin hose blown in to switch clicks on pressure and clicks on release could be ...

Not finding what you are looking for?
Kenmore 6.7 cu. ft. Electric Dryer Logo

24 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...