Roper REX3614KW Electric Dryer "bad timer" Questions

timer is bad. Specifically the timer advance motor is going bad. It is a little electric motor located on the back of the timer. It movers the knob forward automatically as the dryer runs cutting down

...bad timer. Then I realized timer works off control electronics. The electronics tells the timer to turn on or off. So is the timer bad or are electronics bad ? Or how can you tell ?? please remove ...

...timer won't move after you turn it on. Bad timer motor if you are using timed dry. If using auto dry probably a bad sensor. Verify by using any time dry or air fluff cycle and see if the timer

...Bad thermistor. Also some dryers have a contact switch mounted inside or near the timer. Take apart and clean contacts or just spray some "contact cleaner" inside the timer without having to remove ...

...timer is bad. now on some settings the timer works but doesn't always heat up. other times it does. will a timer fix all the issues? Which setting are you using? Time dry or automatic. If all this ...

...Bad timer. Sorry for bad news. was not the timer it was the thermal fuse switch and was less expensive than a new timer switch which was not the cause it was a thermal switch that went bad , FYI to ...

timer to go bad also. Either way i believe the problem is with the timer. You could test the contacts in the timer if you know how to use an ohm meter and read a wiring diagram. My bet is on the timer

timer open Bad Timer on Whirlpool LE6090XS Dryer (1988)? No heat in Dryer. Heater circuit continuity including thermostat and limit switches seems OK, No continuity across timer main heater power path

...then you have a bad timer. Remove the timer motor wires and check for a reading across them timer motor wires, no continuity bad timer. Timer motors are not sold seperately. Manual and more ...

...bad timer. Find the red wire from element to timer and remove it from timer. Check for continuity on that terminal to any other terminal on the timer. Turn the timer and check in all cycles. if you ...