Roper REX4634KQ Electric Dryer "pulley mounting" Questions

Ad

...pulley goes. Unplug dryer or disconnect power. Locate mounting slots in front of motor. (In some cabinets, there are two sets of slots for mounting the idler assembly. In this case, mount the idler ...

Ad

...1st, Unplug the Dryer from the Power Supply. You will need the Exact recommended Replacement "Idler Pulley". With the Belt Ribs Facing Toward the Dryer Drum, position the belt on the tell tale Ring ...

Ad

Kenmore series 70 electric dryer idler pulley The drum in the subject dryer does not rotate. I disassembled the dryer and found the idler pulley laying in the bottom of the machine and the belt was ...

i am installing a new belt but the pulley that mounts to the ground i found was not attached and i am not posotive of its correct spot i need a diagram i need a posted diagram for a whirlpool imperial

the drum stopped turning, when pulled apart theres a pulley wheel laying on the bottom and i see no place where it hooks in it goes in the little grooves right in front of the motor it should have a ...

...drum slides back and forth from front to back. Any ideas? The terrible squeak is probably the idler pulley shaft spalling in the idle pulley mount. When the idler pulley siezes to to pulley shaft it ...

Question about Dryers

1 Answer

Should there be a pulley on the end of the motor shaft of my hotpoint 9303A tumble dryer? SHOULD BE A PULLEY ON THE MOTOR SHAFT AND A IDER ARM PULLEY MOUNTED TO THE BOTTOM OF DRYER,ARE YOU SAYING THE ...

...away from the dryer and requires a second smaller belt to drive it. What goes wrong? The drive pulley for the blower often falls off the motor. Locktite is recommended to keep the blower pulley ...

Question about Dryers

1 Answer

...there are several different styles there are usually four - five components: Drum, belt, motor pulley and the spring pulley (sometimes there is a also a stationary pulley). Please double check ...

Question about Amana Dryers

1 Answer

pulley off where does it go? The pulley with the arm will attach to the base of the dryer...look for a worn spot on the base to mount the pulley arm. I will also include a belt hook up diagram. Please

Not finding what you are looking for?
Roper REX4634KQ Electric Dryer Logo

701 questions posted

Ask a Question

Usually answered in minutes!

Top Roper Dryers Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

CJ Rock
CJ Rock

Level 3 Expert

4429 Answers

Are you a Roper Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...