Roper REX4634KQ Electric Dryer "heating element stays few" Questions

...heating element heats up but was wondering if heating element should stay on constant or if goes on for a few then off for a few is this the way it should run heatibg elements cycle on and off at ...

...element from heating. I haven't take out the element for inspection yet but will do so tomorrow. Does any one out there have any suggestions for repair. Thanks in advance. Any help will be much ...

...heating element. More dry is turning the computer is working, but my clothes just will not dry the dry never heats up. it is only 5 years old. Are they set to die when the warranty runs up Here are ...

...cools. We replaced the heating element and not sure what else to look at. Any thoughts? Make sure your exhaust vent is not clogged with lint. Also make sure the lint trap is clean. Good luck. ...

...heating element turns on for 18 seconds then turns of. It does tis on any setting except cool down, then it runs for 1-2 minutes then the heat turns back on for 18 seconds again , then it turns off ...

...heating element comes on gets hot then will go off, stay off for a few minutes then come on again. I used a small mirror to see up into the element and it is clear that it is intermittent. When it is ...

...heating element is SUPPOSED to cycle on and off. The element has a regulating thermostats to ensure it does not get too hot. If the element were to stay on continuously, the dryer would overheat to ...

...heating element. Double check the breakers and make sure that one side of the double breaker has not tripped. If you have meter and know how to use it check for 220v at the outlet. If I can be of ...

...heating element on a Samsung dryer The element is located inside of the dryer. In order to access it you will need to remove the top cover, the control panel, the front panel, the drum support, then ...

...Any thoughts? working as it should Yes it's normal for blower to run for 1 to 2 mins after heating element shuts down they usually do for a few minutes or if set to fan on mode will stay ...