Roper REX4634KQ Electric Dryer "heater box" Questions

Ad

...and operating thermostat and heater box (lower on heater box) thermostat have continuity. cut off switch at top of heater box has NO continuity. replace cut off switch fuse at the top of heater ...

Ad

...dryer have heat? remove the back and check the heater box fuse and heating element,the heater box is on the right,the fuse is on the left side top,the element is the bottom half of heater ...

Ad

Question about Kenmore Dryers

2 Answers

...heater box probably on the left side of the unit. To remove the heater box, remove the screw that holds the clip from the bulkhead to the heater box. Then remove the high-limit thermostat on the ...

...the heater box,the lower half is the heating coil,remove the 2 wires and 2 screws and pull the heater off,also you need to check the heater box fuse located on the upper left side fg heater ...

Question about Kenmore Dryers

1 Answer

...do myself if I can get the part and figure out where it is....400series remove the back and check the heating element inside the heater box and the heater box fuse on the left side top of heater ...

Question about Whirlpool Dryers

1 Answer

...see the heater box,the fuse which turns the heater box on is at the top of the heater box,replace that and it should work,most of the time what blows the fuse is cloogged wall or dryer vent ...

Question about Zanussi Dryers

1 Answer

...dryer is blowing cold air there is a main dryer fuse and a heater box fuse,the heater box fuse is the small bimetal fuse on the heater box,replace that and you should be ok,let me know how it ...

heater box has an upper and lower half. The top rear of the heater box usually has a metal clip that prevents the heater box from accidentally coming out of the vent hole. To re-install the heater box

Question about Kenmore Dryers

1 Answer

...is no heat remove the back and check the heater box fuse upper left on heater box,and check the heating element bottom part of heater box,the heat box is located to the right of the back of ...

heater box. There may or may not be a hole in the back panel above the heater box where you could put a nut driver through to loosen the screw, if there is not a hole you will need a stubby handle and

Not finding what you are looking for?
Roper REX4634KQ Electric Dryer Logo

701 questions posted

Ask a Question

Usually answered in minutes!

Top Roper Dryers Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

CJ Rock
CJ Rock

Level 3 Expert

4428 Answers

Are you a Roper Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...