Roper RES7646KQ Electric Dryer "stays hot door open" Questions

...hot through the grate in the back when i open the door. Is this normal for this model or is there a part missing? if it does not stay red after you open the door then it's ok. but opening the door in ...

stays hot Also will not shut off unless you open the door The elctrical contacts in the timer have welded themselves together or the notch wheel is broke in the timer; either way you need a new timer,

...hot. Opened the door and could see the element was red hot. Dryer was off and element stayed on I'm guessing. What part failed? Hi, Here is a tip that I wrote about why an electricdryer will not ...

...door open or closed. That's no good....hopefully your house is still standing. Your coil is shorted to ground, so there is constantly 120v being applied to the heating element. It won't get as hot as ...

Hot side wall and staus lights stay on I have a Kenmore Elite HE4 electic dryer. it is approx 4 years old. The vent line is clear. Lately, the right outside of the unit has gotten hotter than usual ...

...DOOR IT WILL NOT RESTART / HAD GOTTEN A SPARK BUT ELEMENT JUST GOT RED HOT I HAD REPLACED THE TIMER AND ALL OTHER ISSUES WERE RESOLVED WITH IT/ IT SEEMS THE TIMER CONTROL SETS THE OTHER FUNCTIONS IN ...

...stays hot hours after using it I dried some clothes the other night and when I went out to take the clothes out the next morning the dryer was hot on the top and in the back of the control panel. I ...

hot. opened drier. Heating coils lit up. (with door open). Turned timer to off to get elemets to turn off. Took drum out. Put multimeter on two main contacts going into motor. Showed 110 volts. Pushed

...stays on and never turns off unless I unplug the dryer or turn the timer to off. (I guess it's the element...the dryer cabinet is VERY hot to the touch and the ''orange glow'' at the back inside of ...

...Door button. The electric starter came on and was red hot for about 15 sections before the flame started. The flame then stayed on for 1 minute and 40 seconds and then it went out. I kept the button ...