...broken belt . when you get the new belt open bag carefully because the way to install it are on the bag. it is not hard to install. the only other part is the door switch press it in and you should ...
...to start it. If it turns freely with little or no resistance the belt is broken or slipping. If it is hard to turn or it tries to turn some then stops the motor is defective or the belt is
...broken belt. If the belt is broken,remove the lint svreen. Remove 2 screws at the lint screen opening. Raise the top lid. Unplug the dryer. Unplug the door switch wires. Remove the front door panel. ...
...Broken Belt. Easy fix. Working from the front open the door and remove screws under the top section so you can get the top panel off. Then you can remove the front panel and drum. Clean her up and ...
...Please help. Try check your timer, and see if you have voltage going to motor. Also check to see if you belt is installed. If broken there is a switch to the belt also. Try check you Door Lid
...broken, this may cause the idler pulley (tensioner) to come loose. This is normal with no tension on the pulley to hold it in place. To install a new belt (if required) and re-install the pulley, ...
...broken belt. Those are my suspicions at the moment. If after checking all of the above the problem persists the only two items left are the motor and the timer assy. I do not suspect either of those ...
...broken, this may cause the idler pulley (tensioner) to come loose. This is normal with no tension on the pulley to hold it in place. To install a new belt (if required) and re-install the pulley, ...
...broken belt switch by the idler pulley. Make sure that its clicking and closing when you move the idler up and down. If the idler is out of position it will not actuate the broken belt switch and the ...
239 questions posted
Usually answered in minutes!
606 Questions
188 Questions
148 Questions
27 Questions
11 Questions
