Roper MHE14XKB Microwave Oven "replace door film inside" Questions

...replace the sealing plastic film inside microwave door? The film has a hole in the center of the door and needs to be replaced. I need instruction on how to replace this film. What tools, etc. do I ...

...film inside the window on the door is pulling away from the glass. Does this consttute any danger. Does it or the micrwave have to be replaced? Other than that the microwave works perfectly. The film ...

...as its just a sticky film. Can anyone recommend where I can find a spare part to replace this myself Yes you do indeed need a new door. The door is a complete safety unit and access to the

film protects the door screen from getting food, grease or moisture in it, which can lead to corrosion and arcing. The screen prevents microwave energy leakage, which can cause arcing and fire. If the

...film on the door. I have the part from Whirlpool, what adhesive should I use? FSP stands for "Factory Service Parts" which I believe was originally terminology from Amana, which now (along with ...

...door. Will the microwave operate safely if the film is damaged or removed? yes. It is there to protect the glass from food splatters It is the panel with the million holes that controls the micro ...

...protective film of the door. Don't know if it is etched in or what, but it looks to be burnt in. In most cases you must replace the glass in the door. Sorry i couldnt be of more assistance. Good ...

...replace this with plexiglass and keep the microwaves from leaking? Pliglas does not inhibit microwaves. Generally, even the glass door isn't protection either. A special film, usually a polymer, is ...

...film (build-up) between the seal and the perforated grate in the door window. The plastic seal looks like it will peel right off the existing door and I've purchased a repalcement plastic panel, bit ...

replace it but I would rather take it in Check to make sure all the door switches are engaging properly. Also, check for intermittent operation. Wiring to the switches also can go bad. Look for burned