Acer AOpen AX 6BC (91.87810.451) Motherboard "keyboard detected system shut down" Questions

...Keyboard/Interface failure Please enter setup to recover BIOS settings Press Del to enter setup USB device over current detected !! System will shut down in 15 seconds And the system shuts down. When ...

...System will shutdown after 15 seconds." After showing the above message the computer shutting down after 15 seconds. Even I cannot enter in BIOS setup. I have checked all the hardware & USB port ...

...Keyboard Error 1 long - 9 short(Beep) ROM Error Long(Beep) continuous DRAM isn't inserted correctly Short(Beep) continuous POWER supply has a problem A two-tone siren, generally caused by ...

...Keyboard Error 1 long - 9 short(Beep) ROM Error Long(Beep) continuous DRAM isn't inserted correctly Short(Beep) continuous POWER supply has a problem A two-tone siren, generally caused by overheating ...

...keyboard error. 9. 1long 9short beep - ROM error 10. Long beep - memory card is missing or not connected 11. Short beep - power supply error 12 Four beeps - there is no fan detected on Fan1 or Fan2 ...

...Keyboard / Mouse 4 x USB 2.0/1.1 ports 1 x VGA port 1 x RJ45 port 1 x COM ports 1 x LPT Audio (1 x Line-in / 1 x Line-out / 1 x Mic) connector CPU/AGP/DIMM setting CPU FSB adjustable via BIOS Power ...

...system. If this still fails to get you going, you may have high density modules which do not work in all motherboards. Did you get the modules from MS Memory Suppliers? When I did a search for your ...

...keyboard and mouse allowing you to attempt to repair your computer you could select the option start at last known configuration that worked this will tell you if and what file has been corrupted or ...

...Keyboard/Mouse) H/W Monitoring H/W detecting and reporting for case open, CPU voltage and fan speed System health status auto-detect and report by BIOS BIOS 2 x 4 Mbit flash ROM Award BIOS ...

system to a bare-bones state to see if it boots, if it does, slowly add the hardware back. By bare-bones state, I mean remove all but 1 stick of RAM (and if it doesn't boot, try a different stick,