Acer (KV.16X04.007) DVD Drive "cd tray eject" Questions

...tray manually so use a pin and try to eject the CD. good luck Sometimes the hook that retains the tray will not release unless the tray is pushed inward slightly while trying to eject - poor

...CD/DVD drive tray by - Straighten a paper clip and gently insert it into a tiny hole below the drive tray next to the Eject button. Push the paper clip gently until the drive tray pops out, then pull ...

tray back inward until it locks back into place. Desktop CD / DVD drives: Gently insert the modified paper clip into the Eject Pin Hole until you feel it make contact with the gear underneath the tray

...CD drive tray by - Straighten a paper clip and gently insert it into a tiny hole below the drivetray next to the Eject button. Push the paper clip gently until the drive traypops out, then pull the ...

...cd/dvd rom, try ejecting the tray by inserting a pin (approx 1mm diameter and 1.25 inch length) in the emergency eject hole located on the front side of the cd/dvd rom in the power off condition, if ...

...CD drive tray by - Straighten a paper clip and gently insert it into a tiny hole below the drivetray next to the Eject button. Push the paper clip gently until the drive traypops out, then pull the ...

...cd rom tray is stuck inside may be due to a hardware error please take a paper clip and make it straight now insert this clip in a small hole located at the front panel of your cd rom drive..apply ...

CD tray My CD tray will not open. If there is CD in it and you want to get it out. Take a paper clip and unbend it. look for a small pinhole on the CD door and insert the clip through it. The door ...

cd/dvd drive doesn't work. Won't open with eject button, How can I determine if it is a driver or hardware problem? Look at the drive there should be a tiny pin hole near the eject button, insert a ...

...CD was improperly placed and it got stuck in the tray. To solve this you can either open up your DVD rom or you can try this: There should be a very small hole on the tray from where you insert the ...