...open door won't stop, have to manually open door Sounds like a bad timer. Your dryer is a Whirlpool product.so a replacement timer should be easy to locate. If the timer is ...
...39;t do anything. Power is fine to dryer. Is there an in-line fuse or something that would have been tripped between loads, even though they were back-to-back? Hello, Yes indeed the dryer has a ...
...door and could see the element was red hot. Dryer was off and element stayed on I39;m guessing. What part failed? Hi, Here is a tip that I wrote about why an electricdryer will not stop heating ...
...39;t start, it could be a number of problems from a broken door latch or start switch to an exhaust duct blocked by lint. It could even be a tripped circuit breaker or blown fuse.The first step in ...
...open the door or start new load. I think it39;s the timer control. But i39;m not sure. Hello, There could be a broken part in the dryer knob, see if you can get it replaced. Could be carbon ...
Question about Dryers
...door in the middle of a cycle. This wasn't a problem for me. When drying a load yesterday, the drum stopped turning in the middle of the drying cycle, even though the heat was still working. ...
open the door and push in the switch,if it doesn39;t click when pushed in the switch is bad,next thing to check is the belt,on some models there39;s a switch on the pulley assy. if there isn39;t
...light. A second press of the start button, which used to start the dryer, now results in three beeps, and no action. Please help the door isn39;t locking properly , open the door and close it ...
Dryer won39;t start Dryer won't start First, with the door opened, push and release the door switch. Does the light go on and off?
...open the door,look around the opening and send the model number.if it39;s an older dryer you could have a bad motor.does it hum with a load in it?if so it39;s the motor,also frigidaire has a rear ...
5 questions posted
Usually answered in minutes!
514 Questions
288 Questions
131 Questions
151 Questions
118 Questions