...the machine. When you open the machine, is there a visible pool of water at the bottom? Check that your waste pipe isn't blocked, and check and clean the filter basket underneath the bottom dish
...pipes aren,t connected properly.You need a water trap (u bend) between the dishwasher and the main waste pipe from the sink. Any decent plumber should be able to fix in less than an hour.Cheers
...is no water in the dishwasher unless i tilt it backwards, but then it leaks. the water pipe is working. the filter is clear, and so is the waste pipe. Is the fill valve opening? Sounds like its
...waste pipe that had been blocked with fat poured into a sink. In case you are not familiar with this I have outlined what we did. Symptoms: The pump is working and your dishwasher waste pipe is ...
...so much. Had a small leak in waste pipe at base. When leaned machine forward a load of dirty water came out. Now working fine but will have to get pipe replaced asap I guess? Cheers for all the
...leak is detected by a small float switch located in the flood catch tray. Undo 4 screws on the metal plate under the dishwasher 3 at the front 1 at the back, this reveals The pump check the seals are ...
Waste pipes leaking etc?? Are they easy to get out of the units and what shoulf I watch out for. Yes sounds like some kind of water leak. Take of the front plinth and check underneath the units and DW
Question about Whirlpool Dishwashers
...pipe to the waste out let(drop in a stack or connect to a "spiggot", then connect the smaller pipe to the water inlet, you can usually connect to the washing machines inlet using a "y" piece, ...
...waste pipe seem fine. If you have only had it for two months I would suggest you contact the dealer and have it repaired under warranty. Any attempt to fix or adjust the unit will void the
38 questions posted
Usually answered in minutes!
56 Questions
31 Questions
34 Questions
36 Questions
19 Questions