Zanussi 24 in. DE6744S Free-standing Dishwasher "phase control flashing" Questions

Ad

...control procedure has been added to all the final drain phases in order to check the status of the pressure switch. The contact must be open in the "empty" position in order to ensure that the cycle ...

Ad

Question about Whirlpool Dishwashers

1 Answer

...control does not sense a temperature rise during the heating phase four parts comprise the heat circuit the controller the thermistor the hi limit thermostat and the heating element unit designed to ...

Ad

Question about Zanussi Dishwashers

1 Answer

...flashing together and the machine stops working altogether after a minute. ANTI-FLOODING CONTROL SYSTEM ALARM [A L 4] Leds [LD9] + [LD10] This control system is operative during the washing phases ...

Question about Hotpoint Dishwashers

1 Answer

phase the Fast and Delicate lights flash and the dishwasher empties. Do you have any ideas as to what the fault could be. This is a bad control board that if replaced will only repeat in a short time

Question about Hotpoint Dishwashers

1 Answer

phase it appears to get too hot and then the lights flash. Do you have any ideas as to what the fault could be. Thanks This is a bad control board that if replaced will only repeat in a short time .My

Question about Hotpoint Dishwashers

1 Answer

...phase and then the two lights fast and eco flash warning of a heater problem. I suspect either the heater, thermostat or control PCB. As the rest of the cycle seems of and the water gets hot then I'm ...

Question about Bosch Dishwashers

1 Answer

...phase. The lights flash and says 0 in minutes, never completing the diagnostic. I replaced the control panel and still it wont wash. The wash cycle starts off at 90 min like expected and even counts ...

Question about Dishwashers

3 Answers

...flashing occurred at the end of the entire wash cycle and didn't self-correct. Solved the problem by putting citric acid (powdered form, used in baking, available from supermarkets), about 40g, in ...

Question about Hobart Dishwashers

2 Answers

...control panel door. make sure the Hot Motor Light is Not illuminated. If it is, you have a hot motor or one of the two sensors in the motor is open(bad, no resistance). With the power off, Motor ...

control pad. I press start/cancel and the light off and I can then start another cleaning cycle again like normal. Of course I can't do this every time I want to use the dishwasher. But I have noticed

Not finding what you are looking for?
Zanussi 24 in. DE6744S Free-standing Dishwasher Logo

31 questions posted

Ask a Question

Usually answered in minutes!

Top Zanussi Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Paul Carew

Level 3 Expert

3808 Answers

Renee Knafel-Bullock

Level 3 Expert

404 Answers

Are you a Zanussi Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...