...multiple switch, turn it through its cycle and test each pair of terminals in turn. The meter should read zero at all of these points. If one or more readings are above zero, the timer is faulty and ...
...multiple switch, turn it through its cycle and test each pair of terminals in turn. The meter should read zero at all of these points. If one or more readings are above zero, the timer is faulty and ...
...3: Make sure that both water faucets are turned on and that the drain and soap-saver return hoses are properly extended, without kinks. If the washer has a water-saver button, make sure the button is ...
...wiring was fine. Finally I stumbled upon a way to clear the error. (It still shows up once in a while.) The following has worked for me CONSISTENTLY about 25 times. 1) Remove top washer cover. 2) ...
...multiple switch, turn it through its cycle and test each pair of terminals in turn. The meter should read zero at all of these points. If one or more readings are above zero, the timer is faulty and ...
Question about Hoover Washing Machines
...Wiring fault Error 3 Not drained in time allowed - washing machine fails to drain water Check that filter is not blocked or obstructed Check drain hose is clear of any blockage or obstruction Check ...
...3 minutes. Potential Causes • Check wire harness connections between the Drive Motor and the Motor Control Unit (MCU), and between the MCU and the Central Control Unit (CCU) • Check the MCU • Check ...
...wiring on the washer, it would work for two or three loads, then my F-28 error would come back. F-28 is a communication error. There are two computers in the washer. Central Computer and motor ...
336 questions posted
Usually answered in minutes!
327 Questions
124 Questions
99 Questions
84 Questions
64 Questions