Zanussi ZWF1430W Front Load Washer "connection err reset" Questions

...normal and get ERR in display? Cleaning out the rubber boot at the discarding pump checked all the connections. Thank you for your inquiry, Dario Hernandez! I see that you are having difficulty with ...

...reset. Then try starting the program again. 3. Checking the water level: Make sure that the water level in the washing machine is correct and that the water supply line is connected correctly. If the ...

sounds just take care with the battery. DON'T put to much heat on it use a screwdriver on the small connections to act as a heatsink

...reset the program. In case it will not help, you should check the door switch. A defective door switch, will prevent washer starting the process. Good luck !! rokkr 101 - Thank you, thank you, thank ...

ERR, PAU and then 56 when any button is pressed. Washer remains in the Normal setting even when the control knob is turned. Already tried: pressing START/PAUSE & CANCEL simultaneously for more than 15

...err 70? F70 and F71 are two logic board error codes that point at a communication error between the main logic module and the control pad (user interface and CCU), and between the motor control unit ...

...ERR. I have tried all the solutions listed on this site. I have also tried every conceivable combination of buttons to unlock the control panel, unplugged the machine overnight and checked the ...