AOpen (MX4SGI4DN2PRE) Motherboard "cmos fail press del enter" Questions

...fail to retain the CMOS settings. This can also be caused by a power surge or a damaged motherboard. But most of the times it would be the battery problem. You can try replacing the CMOS battery and ...

...FAIL TO LOAD INTELL SYSTEM You did not mentioned the whole problem. Anyway, try replacing the motherboard battery. If the problem remains then clean the contact points of the battery socket. In any ...

Press Del to enter BIOS and load Fail-Safe Defaults. 7. Save changes and reboot the system. If your board doesn't have such jumper, you can take off the on-board battery to leak voltage to clear CMOS

...cmos, no 'press del to enter startup' message now. Watch the screen when you press the power button for which key to press to get into System Setup or Bios.  Press Del repeatedly ...

...press the start button on the computer. POST checks the memory and starts the OS too fast to read the progress. The mother board functioned flawlessly for 18 months. It freezes on hot re-start only. ...

press the Pause screen. Try to allow some of the boot screen to load before pausing it. See if you loose video while in pause. If you do loose video display, than the issue is either the video card or

...CMOS, what's left? Restart the computer. If you are already in Windows, you can do this from the Windows Start menu, go to Turn off computer and click Restart. As the computer restarts, watch for ...

...CMOS/BIOS setup, normally by pressing "Del" button to enter setup immediately on powerup before XP boots. Set you PC to boot from the CD ROM and not your HD. Thereafter, go through the installation ...

...fail to detect your hard drive Test all leads that attach to your hard drive including electrical extensions,IDE,SATA the leads from your ((motherboard to your hard drive)) make sure they have a ...

...press f10 to save to cmos to restart  this will set the boot order hope this helps if this fails you might try some of these  Acer: - Ctrl+Alt+EscALR PC: (F2) or ...