Zanussi WJS1265W Front Load Washer/Dryer "jetsystem turbodry washing" Questions

Ad

...Jetsystem Turbodry 1200. Hello, Have you fixed the problem yet? And if yes, how?? I have the same washing machine with the same problem. So I hope you can help me! Best regards, Nourah van ...

Ad

Question about Zanussi Washing Machines

1 Answer

...jetsystem turbodry 1200 when my washer enters the dry cycle it goes into alarm mode and shows fault E20. How can I fix this? Thanks Andy clean out filter, door bottom right, unscrew filter and clean ...

Ad

Question about Zanussi Washing Machines

1 Answer

zanussi jetsystem turbodry 1200 door wont open its the doorcatch,turn power off, remove lid and put hand in machine where doorlock is situated feel about and try open catch, repair or replace?

Question about Zanussi Washing Machines

1 Answer

...jetsystem turbodry 1600 wjs1665 w is not heating the water More than likely the heater element has failed. This is located at the rear of the washer drum. It means removing the rear half of the ...

Question about Zanussi Washing Machines

2 Answers

...TurboDry. Jetsystem Excel. RSI, Rinse Sensor Injection These pages are about how to fit the door seal on a Zanussi 1250. WJS 1397W. TurboDry http://www.agreatportal.com/zanussi_1250/index.html These ...

Question about Washing Machines

1 Answer

...jetsystem excel turbodry 1200. Sad to say i have no instructions and doing everything on same wash i want to be envirementally friendly, also save elec and not to shrink clothes. if you could help ...

Question about Zanussi Washing Machines

4 Answers

...jetsystem Turbodry 1200 hi Washer powers up and all leds work, but when start button is pressed, it keep blinking but dosent start. It was working fine till last week with out any issues. any help ...

Question about Zanussi Washing Machines

2 Answers

...Turbodry jetsystem 1200 What is error code E90 on this washing machine posted By steve hiya e90 means there is a communication error between the circuit boards inside. remove the plug then take the ...

Question about Washing Machines

2 Answers

...jetsystem Turbodry 1200 hi Washer powers up and all leds work, but when start button is pressed, it keep blinking but dosent start. It was working fine till last week with out any issues. any help ...

...JetSystem TurboDry JD12191 - HELP!! 11 month old system - filled with water - stopped! Light flashing for start, press start, two clicks, nothing happens... tried switching off, no joy. No manual so ...

Not finding what you are looking for?
Zanussi WJS1265W Front Load Washer/Dryer Logo

166 questions posted

Ask a Question

Usually answered in minutes!

Top Zanussi Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Kolbrun...

Level 3 Expert

1228 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...