Zanussi WJS1397W Front Load Washer / Dryer "top open" Questions

...open the top of the machine to gain access to the lid switch. The easy way is to grasp the top inside the top of the wash tub with the lid open pulling hard toward your waist and up. It usually opens ...

...open the top by placing a putty knife in the seam between the top/front cabinet panel at the corners and push in to release the clips that hold the top to cabinet then raise top and see if something ...

...You can open the top lid by inserting the putty knife under the top part. There are two clips holding the top part. When it pops up you can open the top part when the lid lock remains

need to open top to clean kenmore type 111 I need to open top to clean Insert blade in to top and body seam to release latch to oppen top. Vitally

...top so it will open - I don't want to chip the enamal The clips are released by sliding a putty knife between the lid and body. There are two clips about 3 inches in from the corners in the front ...

...open the top of a front load washer? most have a few screws at the back of the machine holding the top in place.....once you have taken the screws out, slide the top forward....please make sure you ...

...open the top of a whirlpool calypso how do you open the top of a whirlpool calypso washer You need to use a putty knife. It should slide under the "controls" and hit a spring latch. Push hard, it's ...

...to sharply push back the sides of the washer's top about 2 inches, allowing top to be lifted off machine. reach down to door latch and manually move latching arm on door latch to allow door to

...open the top of my kenmore washer to replace a part? got the part can't get the top open to replace it. the mech. for stoping the tub when open in the spin cycle There is two spring like clips in ...

...OPEN TOP, 2 CLIPS RELEASED WITH PUTTY KNIFE, ONE ON EACH SIDE OF FRONT ABOUT 2"-3" IN FROM SIDE. CLIPS ARE ABOUT 3/4" WIDE. ONCE TOP IS OPEN, LEAN IT BACK IT WILL REST ON PLASTIC BRACKETS, YOU WILL ...