Question about Washing Machines
. It gets down to 10 or 14 minutes and then stops. if you reset it it just does it again and again and again and now it wont spin to empty the water The cycle timer is defective and should be replaced
it trys but stops and then trys and stops HELP http://www.instructables.com/id/GE-Adora-Lint-Filter-Cleanout/?download=pdf Do this - I had the same problem and this fixed it. It takes about 10 minutes
matter wich button I press. Need help. Thanks. unplug machine from mains for 5 mins then try it. close IRE Press "start" & "cancel" for over 10 seconds. Do not force door, wait for a couple of minutes
Question about Washing Machines
...stops 10 min into cycle The washer doesn't want to start (or if it starts, it stops about 10 minutes into the cycle) due to the door lock not working correctly. The door is completely shut, yet the ...
Question about Whirlpool Washing Machines
...10 peices of clothing got so twisted in the bellow i thought i was going to have to cut them the washer must not have stopped the cycle the rubber is still inplace and i got the wire back on but now ...
Question about Zanussi Washing Machines
...10 more minutes to go. Eventually I stopped the cycle and opened the door, the clothes had not spun at the high speed. I put it on the "rinse and spin" cycle - 12 minutes. It stayed on 11 minutes for ...
...minutes intowash cycle and is flashing the time remaining. Door will open andbuttons workbut the washer won't start. I tried holding the pause button down forabout 20 seconds. I tried turning the ...
Question about Samsung Washing Machines
...or electronic control board circuit. try to unplug again, but this time allow the capacitors to discharge, approx 10 minutes. if the controll does not reset, you are in need of a new control
Question about Westinghouse Washing Machines
...stops mid cycle with a high pitched noise with 10 minutes left it wont drain the water. It's a front loader. 7 year old washing machine, stops mid cycle with a high pitched noise with 10 minutes ...
...10 minutes and gives me the dc code. I move stuff around and try it again and it sounds like it is trying to spin and then stops. It drains fine and only leaves a couple gallons of water. How do I ...
43 questions posted
Usually answered in minutes!
327 Questions
237 Questions
124 Questions
99 Questions
84 Questions