Zanussi FS1155W Front Load Washer "clothes damp final cycle" Questions

damp clothes at end of spin cycle washer was real loud at final spin cycle and it doesnt spin clothes dry at final spin cycle now. it wont build up full speed of spin cycle to get clothes dry enough ...

Clothes seem too damp after final rince Hello, After the final spin, the clothes still feel too wet or damp. My question is, do these machines have a filter before or after the pump, if there is a ...

...Clothes remain very damp after final spin cycle. Thank you. Bob Haynes, San Diego your manual states that it can be caused by cold rinses and or spin cycle not getting completed. please try to rinse ...

...clothes come out quite damp. There's no problem with wash being pumped away, all pipes and filter are clean. It's as if they haven't been spun enough. It happens even if the load is nowhere near max ...

clothes aren't even damp and not clean Hi, I know the LG washer is supposed to use little water, but mine uses so little water the clothes aren't even damp. They come out smelling worse than they went

...clothes will be damp.At the end of its cycle water will rush back into the machine and so all the clothes on the bottom will be soaked. Please help.I did replace the lid switch today already. Thank ...

...damp feeling to them but otherwise dry. If your machine is not drying then the element could be going bad, or a thermal cutoff. those would be the easyiest fixes. The BIG drawback is drying. It takes ...

...clothes or too light a load in the machine. Before the spin cycle starts, the drum usually rotates clockwise and anticlockwise to distribute the load evenly. If the above is not causing the problem, ...

...damp clothes in the washing machine for an extended period at the end of the cycle, you will have mildew in your clothes and your machine. The same is true if you put clean clothes in the dryer and ...

...clothes and because they were still too damp to put in dryer, I pressed the Drain/Sprin cycle and again the door had locked and dl f appeared flashing in red. So now I have unplugged again. It only ...