can be fitted round the new seal first to the inner drum,,then pull the new seal through the door hole and fit the outer wire to seal,,, and then job a good un?,,, not easy a,,well i did tell you this
...easy to replace. remove plastic clamp holding door boot to cabinet and peel back in the area of the door interlock. door lock is held in by 2 screws from outside which undo and withdraw lock. ...
...easy,turn off mains open door and look for steel band spring holding front lip of door seal this needs to be removed it will be tight but will pull off,push door seal into drum so as out of the way, ...
Question about Miele Washing Machines
...Easy. Make sure there's no water in the drum. Important! Switch off and remove plug from electricity supply! Remove front base plinth (pulls off use a plastic lever if necessary - one inside soap ...
Question about Zanussi Washing Machines
...screwdriver make sure spring on fully,now fit outer seal lip and fit nylon clamp.You may find it easier to tilt machine back slighty.I do this for a living and it can go easy or hard.Best of
...new seal starting at the topmake sure the seal is fittef the right way up, drainage holes to the bottom. Work the seal on all the way round the drum, and then roll the spring into the groove at the ...
Question about Dyson Washing Machines
...fit the two "easy" external screws. Remove the towels/rags that you had placed around the bottom rim of the drum. Slip on the yellow/seal (making sure you have it the right way round). It goes on ...
fit it back. (It seems similar to placing a new tube on a bicycle tire.) I also have a thin mettle wire loop that is spring loaded that fits into this somehow but again I'm not sure where it came from
...easy to fit, but I have no idea how to open the washer door without causing more damage, so I can unscrew and replace it. Thanks for any help offered :-) 1. Remove the lower panel under the door by ...
...easy to remove front casing to fit new door boot seal First remove soap drawer then the 4 screws here next pull off control know of timer next 3 screws on front panel this then now drops down with ...
48 questions posted
Usually answered in minutes!
327 Questions
237 Questions
124 Questions
99 Questions
84 Questions