ASUS P4GE-V Motherboard "front panel audio connector diagram" Questions

...in d845 epi m/board Front panel 9-pin audio connection is located at "A" on the diagram. There will probably be two jumpers there - remove them and plug in the audio connector It can only fit one

...front panel audio header on an Intel® Desktop Board lets you connect to a front panel audio module built into a system chassis. This document describes the header pin-out configuration for connecting ...

...front panel audio connector, if your case has each wire separate. then please look at this webpage http://www.intel.com/support/motherboards/desktop/sb/cs-015851.htm look at the part "For AC97 Front ...

Front Panel Audio I own the Aus P4GE-V motherboard, i lookd at the diagram and tried hooking up my frount panel audio wires to the pins wich it said to, but there was also to jumpers i had to pull off

...and front panel audio connectors http://eu.msi.com/index.php?func=downloaddetail&type=manual&maincat_no=1&prod_no=205 pick one of the manual downloads at the bottom of the page

front panel connectors Hi,i am moving my asus p4s533 motherboard to another casing.unfortunately i don't know how to connect the front panel connectors (usb,audio.power leds,etc...).i downloaded the ...

front panel connector J16 dell dimension 2350 I cant correct connect front panel connector J16 in motherboard dell dimension 2350. Please, if you have this information, help me!!! Visit http://support

...Front panel Audio is usually: Pin 1 Left MIC-IN Pin 1 right GROUND Pin 2 Left MIC VVC (or MIC Power, or MIC BIAS) Pin 2 Right empty Pin 3 Left R EAR (or R OUT) Pin 3 Right R RETURN Pin 4 Ground or ...

...front panel, ie, power switch, leds, usb, ear phones and microphone sockets. usb pinning, 1.+5v 2.+6v 3.P5- 4.P6- 5.P5+ 6.P6+ 7.GND 8.GND 9. 10.NC Audio connectors 1.MIC 2 2.A GND 3.MIC PWR 4.+5VA ...

...supply) 3) Any case fans with 3/4 pin connectors. 3) hard drives (SATA or IDE) 4) USB front panel ports 5) Audio front panel ports 6) Case plugs (power LED, hdd LED, power switch, and reset