Question about Coleman Electrical Supplies
My generator is bogging down every time i plug it in. I am getting a good voltage reading of 240 between my two hots on my 30 amp 220 4 prong plug and i am getting a good reading of 120 between both ...
Question about Buffalo Tools Electrical Supplies
buffalo tools 7000 watt 13hp ohv 4 stroke valve clearance I need the valve lash clearance specs if you cannot get the specs from on line or from a service agent , generally the following apply:- water
Stator got hot on my generator Stators can get hot, but not too hot? how much are you talking. This is indicative of a short in the output wires, and / or overloading with inductive loads. Compressors
gnerator not producing ac power whenthe generator is running it doest produce any power. it was started under load I recently had a similar problem during "Sandy". I forgot to turn off the hot ...
Question about Honda Electrical Supplies
...load once it is switched off and cools down it works until it gets hot again similar to that of a cars ignition coil which will get hot and cut the vehicle out but once it cools it will start
Question about McCulloch Electrical Supplies
...gets hot and starts to smoke. What could be the problem or solution? thanks jeff Joyce If you really mean the "generator head", which I understand as the outer bearing cover of the generator, your ...
Question about Honda Electrical Supplies
cannot get my generator to run on 220 mode, only runs on 110 when I disengage the auto throttle when I switch to 220, it stalls to the point of all but shutting down the engine There's a short in the ...
4000 watt onana generator. Shuts down after a couple of hours. Won't start back for about 30 minutes. The generator has a code that flashes to tell you the problem but don't know what the 3 flashes ...
Question about Briggs & Stratton Electrical Supplies
the generator starts to get hot and smoke after about 1-2 min blue smoke ? piston rings too much oil?
i have a yamaha 3000isb generator. checking i have a yamaha 3000isb generator. checking voltage with multi-meter I get 60 volts between ground and each (hot and neutral) with the generator grounded. ...
1 questions posted
Usually answered in minutes!
1 Questions