Canon I990 InkJet Photo Printer "cannon green orange light" Questions

...cannon printer no longer responds to any commands. I get 4 yellow blinking lights and then 1 green blinker. Need help with my i550 When I turn it on the light gives a short green flash, short orange, ...

cannon i960 blinks 1 green , 3 yellow etc... Won't print sayas pa Won't print says paper jam but can't find paper bolck Canon i850, i950, S600 Start with the printer OFF 1. Hold down RESUME and then ...

cannon i 950. Orange light keeps flashing and it says paper thikness lever position. What should I do? I have switched on and off but no luck. Please can anybdoy help me? A friend of mine had the same

...Cannon ip4000 error message waste ink almost full how do I empty it or remove this message. Printer is still working? JB Hi there 1. With the printer plugged in and powered off, press and hold the ...

...- Test print (or exit service mode on i960) 1 press - orange - EEPROM info print (plus grid nozzle diagnostic on s600) 2 presses - green - EEPROM initialize 3 presses - orange - Reset waste ink ...

...cannon MP160 only the alarm light comes on (not Blinking) and nothing else works no matter what I do can you help Ok this may do the trick, can only try.Also if you are using the Refillable ink ...

cannon i 350 printer for some reason the power light is going to green and orange???? Dear Ian, If the power light is goin to green and orange as you turn on the power during POST (power on selt test)

...Cannon Pixma MP160 printer. on/off light keep blinking and a code 1 stays there. Also message reads that the printer is performing another duty if i try to print. At one time the number 3 and E with ...

Cannon i80 - message Waste Ink Tank Full Follow this procedure: 1) Close the print head cover, and turn off the printer. While pressing the Resume/Cancel button, press the Power button. (Do not ...

...green and orange Found this today (and it worked): canon waste tank reset for canon i70 Below is a procedure that in most cases should resolve a Canon i70 waste tank issue 1) Close the print head ...