Canon LBP3200 Laser Printer "shake flashlight" Questions

...shake (horizontally) back and forth. Check inside for loose paper or toner. You can use a flashlight to look inside to the back and see the fuser roller. Check to see if you notice a bad spot on the ...

flashlight to locate it and the remove it. after removing it, give it another shake, and keep removing and shaking until ther is no more rattling. Then it should work fine. if your printer always have

...shake you may hear the object rattling. If you are lucky it will also fall out. After it fall out keep shaking to see if ther are other objects. If not you may need to use a small flashlight to ...

The MFC 640CW still reports a paper jam tho I have cleaned out any visible bits of paper from front, rear, and top. Leaving power off overnight doesnt help, neither does shaking the printer upside ...

shake it a little, side to side. Your trying to dislodge anything that might be stuck in the paper entrance area. If nothing falls out, then turn it back over and use the flashlight to once again look

...You can turn the printer over and shake it, or look inside with a flashlight and small mirror. Last time was a sheet rock screw. If you find nothing, it's probably a shop repair to look

...with a flashlight as best you can, and see if maybe a staple or paperclip got lodged in there. In mine it was a small oyster cracker. Turn it over and shake the **** out of it. see what falls

flashlight, look carefully for anything you can find and remove it. You can also pick up your printer, turn it upside down and gently shake it so that anything in the printer will fall out. You may be

...flashlight and mirror, or just turn the whole thing upside down and shake it and see what falls out. Last week a woman had a Bic pen fall out when she did this and sometimes I find wrappers, pins, ...

...flashlight for a piece of paper that might be in there somewhere. Get a can of compressed air and blow out the machine. Make sure a paper clip hasn't come off and fallen into the machine. Don't be ...