Canon BubbleJet i550 InkJet Printer "remove print head" Questions

...remove the print head.Clean the contacts on printer and print head using piece of cotton and some alcohol.Then put back all again.If the problem persist you need to replace the print head.It's part ...

...remove the print head and check the electrical contacts for foreign matter, then reinstall. For the i9950 ONLY: When the CD-R tray is set in the printer, remove the CD-R tray and set the paper output ...

remove the print head.Run hot tap water and put the print head with the nozzles up to stream water.Hold that 5 mins then turn the print head around with the nozzles down.Hold that for every color of 5

remove the round (8 mm) glued upper metal sheet filter on the upper part of the print head where the ink cartridge sets. Once removed you can use a syringe needle filled with alchool to remove the dry

...Remove and clean the print head. Open the printer and lift the gray lever and just pull out the print head. There are no tabs to push, it simply slides out. Search the web for cleaning techniques. ...

...Remove the print head and wash under running warm water. Dry it with a soft paper towel and replace it and the cartridges in the printer. Close the hatch and wait for the machine to reset. Hold the ...

Cannot remove the print head from canon i560 printer try this - open cover on printer on the right side of the cartridges is a grey arm - lift it up remove all ink cartridges. then remove print head.

...heads. Put on some disposeable gloves, and get a clean cotton cloth, slightly dampened, and remove, and wipe off the print heads and any other surfaces that you can get at near the print head

...remove the print head. Re-seat the print head into the print head holder and lower the print head lock lever until a click is heard. Insert the appropriate ink tank into the slot at the right end and ...

...print anything in color. Cleaned printer head......reset.....still have problem. If you can remove the color printer head . try to soak in the hot water for almost 2 hour to melt the clogged ink in ...