Canon MultiPASS F80 All-In-One InkJet Printer "ink pens colored" Questions

How do I remove ink from a Xerox Phaser 8400 - I want to load new ''fresh'' ink I use a pen or something similar to work it up the loader and the stab it wit a push pin or paper clip to lift it out. ...

...new cartridges (56 & 57) installed about a week prior (they are still "pregnant or weighty" with ink), the printer stopped printing and a "pen failure" message appeared when i went to the utility.

replaced empty black ink cartridge, wont print black ink even after cleaning and aligning the printheads The head of your printer cartrige (black) are not detected by the printer because it was damage

...blue, the words print. Black text, no printing. How can I fix this? have you already replaced the ink of your black?.. For severe print quality or missing color issues (...printers which use HP564 ...

...are magenta and my greens are blue This is an HP Photosmart C6280 all in one Step one: Check the ink cartridges HP doesn't guarantee the quality or reliability of non-HP ink. If the ink cartridges ...

I'm getting an error: 09,008.43:3152 ink jam. I followed the instructions: make sure the color blocks move freely, restart, etc. When I checked the color blocks, it appears that one is cracked or ...

Pen in chute 1 has tsr failure. Your black ink cartridge is bad. Pen = ink cartridge chute 0 = color cartridge holder chute 1 = black cartridge holder tsr = Themal sensor resistor

...verify activate a CLEAN PRINTHEAD routine from the TOOLS/MAINTENANCE menu to see if you can blow ink thru the PRINTHEAD nozzle plate. You many need to place a damp cloth under the printhead to

not printing correct colors all come out light brown or pink This is a officejet 6500 E709n For severe HP OJ 6500/6500A/7000 print quality/missing color issues, or incorrect color output, there could ...

Photosmart B8550 color inks running low after printing only 1 or 2 4X6 prints. Also, have refilled cartridges, and black is coming out blue. I'm using a MacBook Pro OSX 8.6. I have set the print ...