Canon BubbleJet i9950 InkJet Photo Printer "colours printing" Questions

...colours stopped printing at the same timeannabellamt My i550 Canon Printer will not print colour, black only. Colour cart. are full. Computer checked out OK. Driver is OK. All 3 colours stopped ...

Won't print in colour I have installed new colour ink cartridges into my printer however when I print documents that have black and colour, only the black prints. It will not print any colour. When I ...

Hi B/w printing is ok but color printig seems blurred and fainted and blue is missing hi..... This is because the colour catridge might have finished. for black and whicte printing you have separate ...

...colours stopped printing at the same time. linda gal 16 try looking under the propertys page for the printer and see if its set to print black only or gray scale. if so set it to auto and you should ...

...printing black. All the other colours printed okay. Tried cleaning 6 times, deep cleaning 4 times, cleaning nozzles with solvent, reinstalling drivers, and different computer & leads. Tried another ...

Printer wont print anything in colour Hi PRinter will do the black stuff fine, but no coloured objects, text anything will print. You can hear the printer sounding like it is printing but page is ...

...printing I solved the initial problem - required a computer 'head clean' followed by a test print. Cleaning ink tank I will try and seems reasonably possible though i am a mechanical engineer and not ...

...printing photos appears striped horizontally. head alignment test patterns for column b (blue) in the test patterns consists of two horizontal bars -full top lines but vertical bars below. head ...

... I have sent a test pattern which is made up of the 4 colour bands, each band represents 1 of the 4 colours. I get a uniform white deletion in each band(a stripe effect if you will)in all colours. ...

wrong colour For some unknown reason, the printed colours produced by my i550 printer are nowhere near accurate anymore, what has gone wrong? I am using Vista. Have you done the nozzle check print? It