Canon ImageClass MF5770 Laser Copier Printer Fax Scanner Network "status sleeping" Questions

...you must access the RUI (Remote User Interface). From there you should be able to see your copier's status and everything. Make sure it is online and ready to print, and then unistall it from the ...

...folder as a result of uncompressed downloaded file. 9. Confirm that the machine is in the ready status, and then click [Transfer] If the printer is not detected: Check if the printer's power is ...

...folder as a result of uncompressed downloaded file. 9. Confirm that the machine is in the ready status, and then click [Transfer] If the printer is not detected: Check if the printer's power ...

I have to turn the machine off and restart it in order to print. If the machine has the green Ready status, I don't have this problem. Any clues? Hi Go to the Setup mode and disable the sleep mode

yellow light on top front panel left hand side, what is this warnign for? Couple options . pint a status report by holding down the main button until the printer starts making noise. Or browse the ...

my printer says it is offline but the status monitor at the bottom of the screen says its ready... but will not print.. whats going on? I've been suffering the same problem, but I think I havefound a ...

... how do i take it off sleep mode? The control panel features a series of buttons as well as an LED "Status" screen. Press the "MENU" button. Go to INITIAL SETUP, select "FAX" select "RECEIVE MODE" ...

How to change "offline" status to "online" I just purchased this printer and had a friend help with installing the software. While I was away he had no problems printing a document. When I've tried, ...

...green) and Error (red) lights on the top of the printer may be the first indication of trouble. The status of the lights, on, off or flashing, indicates your printer status, as described below. The ...

...one thought is that I may not have a bi-directional parallel cable, because there is a "get printer status" button (?) that cannot query the copier to get status... the parrellel port is used also to ...