Canon PIXMA iP1600 Printer "print something darker" Questions

You dont say what your document is which makes it hard to answer. Bear in mind docs that are in grey are very hard for a printer to reproduce. try changing the colour of the print for something darker

...print something there is a heavy black line (about 1/4" thick") down the center of the back side of the page. If I print several pages in a row the line gets faint but is still there. After replacing ...

...print out 10 blank pages. If line is still there and has not faded, this is unusual and may need servicing. There may be a problem with the encoder strip (it's a clear plastic strip with black lines ...

...something I can do at home to move it?,Usually the standard procedure is turn it on and you can hear the ink head move right to left and back again.It is no doing this. thank you [email protected] ...

...print darkness to a higher level, there should be no reason to go darker than 20. I would imagine you have changed the ribbon for something like Wax to a Premuim Wax Resin which take more heat to ...

...something I can do to get it to printer darker? Go into start- Printers and faxes and right click on the printer, then go to properties. Depending on the printer (it varies greatly) there should be a ...

...darker. When I look at the cartridge, the blue roller is covered with toner, it isn't getting cleaned off for some reason. Is there something wearing out and is it worth replacing? The cartridge ...

print on Kodak Photo Paper (Glossy). Just getting frustrating after wasting 20+ sheets of paper on something that was supposed to be a simple point and click job. Any suggestions would be appreciated

...on computer screen Bring up printer prog/properties/options and if correct there will be a menu to adjust printer preferences ie ink something like Draft quality/Normal/ Professionall or Best

...print unless I change the color also. Is this true or am I doing something wrong. Or do I have to also but the color cartridge. This is true. Printer manufactorers just want you to spend money on ...