Canon imageRUNNER 3300 All-In-One Laser Printer "paper heater" Questions

...that b4 it roll out completely the paper will stop and it will be showing paper jam. Check the heater sensor an replace it Check the heater sensor is in own place, clean sensor, check connector ...

ir 3300 paper jam paper jam in heater section in put how to retifited the heater section is the fuser you should be able to pull the tray out and then lift the door of the fuser paper jam 1081

...like a spring and image cannot dried. its heater fuser issue > you need to take the heater into parts . slide out the fuser paper clean the old oil , re lubricate the slide ,put the fuser

xerox 8200 Could you foward the instructions for changing the barrel bulbs You can not change the bulbs in the paper pre heater you have to get the whole paper pre heater unit.

...know why the printer is warming up the answer is because the heater needs to burn the toner on the paper. The heater heats up at cca 250 degrees celsius. Otherwise the toner would fall from the

paper will stuck at the heater when i run a print on my konica 2223 the paper will stuck at the rollers located above the heater(dont know the exact name of that part of the copier).hope that somebody

...paper jaming in heater section what can i do I replaced Pressure roller and film but sitll paper is jaming in heater section check your outlet delivery guide or whether your fuser film rotation Did ...

...paper out of wet and stored in dry place.2-use cooling oil and replce oil cartidge in the heater section.3-replace silicone roller (the lower roller in the heater}4-check for smoth movement of exit ...

heater is the part that fuse the ink to the paper. since part of print is not fused to the paper. I am assuming at this time it must have multiple heater in the machine. go to the link and see if they

the copier says there is a paper jam but there is no paper or piece of paper visible You have to see the inside heater drum may be there is a piece of paper inside.