Canon S400 InkJet Printer "ink cartridge indicator beeping inks" Questions

...Ink BJ Cartridge Misinstalled Orange 5 Re-install cartridge or replace it NO BJ Cartridge Orange 6 Re-install cartridge or replace it BJ Cartridge Error Orange 7 Re-install cartridge or replace it ...

Ink Empty replace cartridge Had a paper jam, turned of the printer and moved the print head out of the way to remove the paper. The paper had ink in a blob where the head stopped. After turning on the

ink cartridge is dry. Is there any link to the flashing light and the out of ink status? try this Indicates Waste Ink Full error To repair follow the steps below 1: Unplug Power Cord 2: Hold POWER and

...ink cartridge and it did not help The 8 beep error you are getting is a waste ink tank full error. The BJC 85 has a waste ink " tank " that is actually a series of absorbent cotton pads in the bottom ...

...ink cartridge is installed in the incorrect location. It is in the correct location. I even purchased a new Black ink tank and cartridge and installed it because I thought it may be old and clogged. ...

...INK COUNTER in a CANON BJC-55: Waste Error Reset Many thanks to Vince Gyver for sending this in. Unplug Power Cord Remove the Battery While pressing and holding the RESUME Button plug in Power Cord ...

Ink Full error To repair follow the steps below 1: Unplug Power Cord 2: Hold POWER and RESUME buttons 3: Plug in Power Cord 4: Release buttons after the printers starts up 5: Hold CARTRIDGE and RESUME

...ink cartridge and it will only print what is my email address. I went to Office Max and bot a new black ink cartridge and it still does not print. I had someone else come by and they were able to ...

...ink cartridge-related error messages may occur due to one of the following reasons: * The ink cartridge does not make a proper electrical contact * The cartridge is bad or wrong * The cartridge is ...

...inks, the price differance for cartridges might make a repair worthwhile. Canon S450 Printer 1: Power off printer 2: Hold Resume button then press and hold POWER, the beeper will sound once. 3: Hold ...