...tabs to push, it simply slides out. Search the web for cleaning techniques. Looks like people have tried hot water, isopropyl alcohol, and ammonia. I don't know what the best technique is. It's ...
...Hot!! Let cool for 10 minutes after turning off the power and unplugging the copier! 2) Pull the two blue locking tabs forward and remove the fuser unit. Reinsert and push back on the tabs to lock ...
hot fusor error #50.2 comes up Hi Zaikow,Whats the printers model?Still, check the fuser and make sure its well held in place by the two tabs otherwise if the tabs are loose,the error will appear.Hope
...Hot!! Let cool for 10 minutes after turning off the power and unplugging the copier! 2) Pull the two blue locking tabs forward and remove the fuser unit. Reinsert and push back on the tabs to lock ...
Question about Sharp Office Equipment & Supplies
...tabs either side, but does not release hot roller assembly. toner tray slid out front ok, but along side toner feed mech w/handle will not slide out front/afraind to pull to hard. I have a Service ...
...hot!) is inside the drawer, locked by two tabs, and slides upward at a slant (this is for the Eco model, but the 4000DN should be similar). Open the back panel and pull it all the way back. Pull the ...
...hot. Well there is latches as an Authorized Okidata Service Provider I believe these "TABS" should be the color of BLUE. release the tabs and the entire fuser come out just grab the handle that ...
CODE C0500 This is a fuser error code. The fuser is the part that gets hot, just before the paper exits the machine. It may have to be replaced. Try resetting the code first by using the following ...
printing lines on the photo using bulk ink Good Day! Please follow the instructions: 1. open a blank document (word,excel,) 2. control P 3. under printer properties hit on maintenance tab. 4. then hot
Question about Canon BubbleJet Office Equipment & Supplies
...tabs "C1" fuser unit(unit that gets hot) pull on them then the unit will come away from the machine slide it back into the machine making sure not to slam it. Close the machine. To reset the error ...
418 questions posted
Usually answered in minutes!
82 Questions
56 Questions
48 Questions
34 Questions
23 Questions